Garr Tool 50371 12x75mm 1mm W/F 4FL 26mm F/L AlCrN V4R End Mill
$99.47
- 12x75mm 1mm W/F 4FL 26mm F/L AlCrN
- Recommended for Titanium, Inconel, and Stainless Steel
- Variable Helix – Corner Radius – 4 Flutes – AlCrN Coated
- Solid submicron grain carbide end mill – center cutting
Garr Tool V4R Series End Mill — 12x75mm 1mm W/F 4FL 26mm F/L AlCrN
- Recommended for Titanium, Inconel, and Stainless Steel
- Variable Helix – Corner Radius – 4 Flutes – AlCrN Coated
- Solid submicron grain carbide end mill – center cutting
- Engineered for High Efficiency Milling
- Helix geometry varies over length of flutes
- Variable flute design helps with chip evacuation in slots and pockets
- Variable rake aids in chip formation
- PCT (Polish Carbide Treatment) enhances tool life
- Minimizes burr on part
- Smaller diameters can be modified with a flat within 48 hours
- (The combination of an extended flute length with a weldon flat
- may cause the flute length to reach inside some end mill holders)
Tolerances
- flute dia. +.000-.002″ (+.000-.050mm)
- shank dia. h6
- radius +.001-.001″ (+0.025-0.025mm)
Made by Garr Tool, Alma, Michigan (ISO 9001:2015). WARNING: This product can expose you to chemicals including cobalt, which is known to the State of California to cause cancer. www.P65Warnings.ca.gov
| EDP # | 50371 |
|---|---|
| Series | V4R |
| Description | 12x75mm 1mm W/F 4FL 26mm F/L AlCrN |
| Flutes | 4 |
| Flute Diameter | 12 mm |
| Flute Length | 26 mm |
| Shank Diameter | 12 mm |
| Overall Length | 75 mm |
| Corner Radius | 1 mm |
| End Type | RAD |
| Flat | Y |
| Weight (lbs) | 0.2500 |
| Coating | ALCRN |
| Made in | USA (Alma, Michigan) |
Applications
Plunge, ramp & side cutting
Slotting (corner radius)
Side milling (corner radius)
Tolerances
- flute dia. +.000-.002" (+.000-.050mm)
- shank dia. h6
- radius +.001-.001" (+0.025-0.025mm)
| EDP # | Flute Diameter | Flute Length | Overall Length | Corner Radius | Reach Length | Price |
|---|---|---|---|---|---|---|
| 50172 | 0.1562" | 0.5000" | 2.0000" | 0.0100" | $33.62 Add to cart | |
| 50173 | 0.1562" | 0.5000" | 2.0000" | 0.0150" | $33.62 Add to cart | |
| 50174 | 0.1562" | 0.5000" | 2.0000" | 0.0200" | $33.62 Add to cart | |
| 50175 | 0.1562" | 0.5000" | 2.0000" | 0.0300" | $33.62 Add to cart | |
| 50183 | 0.1875" | 0.5000" | 2.0000" | 0.0100" | $32.95 Add to cart | |
| 50184 | 0.1875" | 0.5000" | 2.0000" | 0.0150" | $32.95 Add to cart | |
| 50185 | 0.1875" | 0.5000" | 2.0000" | 0.0200" | $32.95 Add to cart | |
| 50186 | 0.1875" | 0.5000" | 2.0000" | 0.0300" | $32.95 Add to cart | |
| 50194 | 0.2188" | 0.7500" | 2.5000" | 0.0100" | $36.56 Add to cart | |
| 50195 | 0.2188" | 0.7500" | 2.5000" | 0.0150" | $36.56 Add to cart | |
| 50196 | 0.2188" | 0.7500" | 2.5000" | 0.0200" | $36.56 Add to cart | |
| 50197 | 0.2188" | 0.7500" | 2.5000" | 0.0300" | $36.56 Add to cart | |
| 50489 | 0.2500" | 0.3750" | 2.0000" | 0.0100" | $31.92 Add to cart | |
| 50490 | 0.2500" | 0.3750" | 2.0000" | 0.0150" | $31.92 Add to cart | |
| 50491 | 0.2500" | 0.3750" | 2.0000" | 0.0200" | $31.92 Add to cart | |