Special Offer
-
Amana Tool, Router Bits, Straight Plunge Router Bits
Amana Tool 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank
Amana Tool, Router Bits, Straight Plunge Router BitsAmana Tool 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank
#45210
Diameter (D) 1/4 Cutting Height (B) 1 Shank (d) 1/4 Overall Length (L) 2-1/4 Flutes 2 Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
SKU: 738685852101 -
Amana Tool, Panel Pilot, Router Bits, Trimming Router Bits
Amana Tool 51200XL High Performance Solid Carbide AlTiN Coated Panel Pilot Flush Trim 1/4 Dia x 1/4 x 1/4 Inch Shank 1-Flute
Amana Tool, Panel Pilot, Router Bits, Trimming Router BitsAmana Tool 51200XL High Performance Solid Carbide AlTiN Coated Panel Pilot Flush Trim 1/4 Dia x 1/4 x 1/4 Inch Shank 1-Flute
#51200XL
Diameter (D) 1/4 Cutting Height (B) 1/4 Shank (d) 1/4 Overall Length (L) 1-1/2 Type Flush Flutes 1 SKU: 738685512227 -
Accessories, Amana Tool, Fractional Steel Ball Bearing Guides, Router Bits
Amana Tool 47706 Steel Ball Bearing Guide 1/2 Overall Dia x 3/16 Inner Dia x 3/16 Height
Accessories, Amana Tool, Fractional Steel Ball Bearing Guides, Router BitsAmana Tool 47706 Steel Ball Bearing Guide 1/2 Overall Dia x 3/16 Inner Dia x 3/16 Height
Amana Tool® uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life.
47706
SKU: 738685877067 -
Amana Tool, Flush Trim, Router Bits, Trimming Router Bits
Amana Tool 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank
Amana Tool, Flush Trim, Router Bits, Trimming Router BitsAmana Tool 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank
Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
#47100
SKU: 738685871003 -
6-1/2" Diameter, 6-1/2" Diameter., Amana Tool, Saw Blades, Saw Blades, Saw Blades., Timberline
Timberline 65040 Carbide Tipped Floor King For Crain Jamb/Undercut Saw Blade 6-1/2 Inch Dia x 40T ATB, 19 Deg, 7/8 Concave Bore
6-1/2" Diameter, 6-1/2" Diameter., Amana Tool, Saw Blades, Saw Blades, Saw Blades., TimberlineTimberline 65040 Carbide Tipped Floor King For Crain Jamb/Undercut Saw Blade 6-1/2 Inch Dia x 40T ATB, 19 Deg, 7/8 Concave Bore
Comparable to Crain 821, 6-1/2 D x 40 Teeth x 7/8 Concave Bore x ATB Grind Designed for 812, 820 & 825 Jamb/Undercut Saws, Carbide Tipped Saw Blade
- Easy management
- Fast printing. Strong protection.
- Easy management. Efficient printing.
- The 2-line LCD display is simple to read and operate.
- Stay connected with easy mobile printing options
SKU: 738685650400
-
CAT40 Precision ER Toolholders, Holders, Techniks, Tool Holding
Techniks 22253 CAT 40 ER32 Collet Chuck Holder x 2.76″ Length
CAT40 Precision ER Toolholders, Holders, Techniks, Tool HoldingTechniks 22253 CAT 40 ER32 Collet Chuck Holder x 2.76″ Length
ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixture.
- Balanced to 25,000 RPM at G2.5
- T.I.R. 0.0001″ measured from taper to collet pocket
- PowerCOAT nut included for 75% more clamping power
Purchase 5 or more holders and receive corresponding collets FREE!!
**Note: Collet not included with holder.
SKU: n/a -
CAT40 Precision ER Toolholders, ER32, Holders, Techniks, Tool Holding
Techniks 22255 CAT 40 ER32 Collet Chuck Holder x 4″ Length
CAT40 Precision ER Toolholders, ER32, Holders, Techniks, Tool HoldingTechniks 22255 CAT 40 ER32 Collet Chuck Holder x 4″ Length
ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixture.
- Balanced to 25,000 RPM at G2.5
- T.I.R. 0.0001″ measured from taper to collet pocket
- PowerCOAT nut included for 75% more clamping power
Purchase 5 or more holders and receive corresponding collets FREE!!
**Note: Collet not included with holder.
SKU: n/a -
CAT50 Precision ER Toolholders, ER32, Holders, Techniks, Tool Holding
Techniks 22311 CAT 50 ER32 Collet Chuck Holder x 4″ Length
CAT50 Precision ER Toolholders, ER32, Holders, Techniks, Tool HoldingTechniks 22311 CAT 50 ER32 Collet Chuck Holder x 4″ Length
ER collet chucks handle a wide range of machining jobs without having to buy new tool holders. Simply choose the right size collet for the job, set tool depth, and tighten the collet nut and pull stud to the proper torque using a torque wrench and tightening fixture.
- Balanced to 25,000 RPM at G2.5
- T.I.R. 0.0001″ measured from taper to collet pocket
- PowerCOAT nut included for 75% more clamping power
Purchase 5 or more holders and receive corresponding collets FREE!!
**Note: Collet not included with holder.
SKU: n/a
-
Amana Tool, Router Bits, Straight Plunge Router Bits
Amana Tool 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank
Amana Tool, Router Bits, Straight Plunge Router BitsAmana Tool 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank
#45210
Diameter (D) 1/4 Cutting Height (B) 1 Shank (d) 1/4 Overall Length (L) 2-1/4 Flutes 2 Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
SKU: 738685852101 -
Amana Tool, Flush Trim, Router Bits, Trimming Router Bits
Amana Tool 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank
Amana Tool, Flush Trim, Router Bits, Trimming Router BitsAmana Tool 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank
Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
AMAX Extended Life Features:
- 200% longer life time even when working with abrasive materials
- Superior geometric design
- Advanced grinding technology that improves the carbides’ resistance to wear
- Super clean cuts
SKU: 738685871027
Products Grid
Best Sellers
Recently Added
Amana Tool 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank
Amana Tool 45210 Carbide Tipped Straight Plunge High Production 1/4 Dia x 1 Inch x 1/4 Shank
#45210
| Diameter (D) | 1/4 |
|---|---|
| Cutting Height (B) | 1 |
| Shank (d) | 1/4 |
| Overall Length (L) | 2-1/4 |
| Flutes | 2 |
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Amana Tool 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank
Amana Tool 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank
Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
AMAX Extended Life Features:
Amana Tool 45218S Carbide Tipped Straight Plunge High Production 3/8 Dia x 1 Inch x 1/4 Shank
Amana Tool 45218S Carbide Tipped Straight Plunge High Production 3/8 Dia x 1 Inch x 1/4 Shank
#45218S
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Timberline 65040 Carbide Tipped Floor King For Crain Jamb/Undercut Saw Blade 6-1/2 Inch Dia x 40T ATB, 19 Deg, 7/8 Concave Bore
Timberline 65040 Carbide Tipped Floor King For Crain Jamb/Undercut Saw Blade 6-1/2 Inch Dia x 40T ATB, 19 Deg, 7/8 Concave Bore
Comparable to Crain 821, 6-1/2 D x 40 Teeth x 7/8 Concave Bore x ATB Grind Designed for 812, 820 & 825 Jamb/Undercut Saws, Carbide Tipped Saw Blade
Amana Tool 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank
Amana Tool 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank
Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
#47100
Amana Tool 51314 Carbide Tipped Stagger Tooth Plunge Panel with Center Pilot 1/2 Dia x 2-3/16 x 1/2 Inch Shank
Amana Tool 51314 Carbide Tipped Stagger Tooth Plunge Panel with Center Pilot 1/2 Dia x 2-3/16 x 1/2 Inch Shank
#51314
This version of the panel pilot bit has a stagger-tooth configuration for fast, clean cuts, coupled with a solid pilot between the cutting edges. Designed specifically for the caravan, star wagon, trailer, coach, mobile/motor home, RV-manufacturing industries and shed manufacturers to cut openings in ceilings and sidewalls, it can be used in any setup that has a template between the materials to be cut.
Amana Tool AMS-CNC-58 – Master CNC Router Bit Collection, 58-Pcs
Amana Tool AMS-CNC-58 – Master CNC Router Bit Collection, 58-Pcs
We have the tool you need for every CNC application! Whether you’re creating signs building cabinets or surfacing large areas we have created a versatile mix of router bits to complete your project. Each router bit is manufactured from Amana’s exclusive grade carbide according to stringent quality standards.
Amana Tool 47104 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank
Amana Tool 47104 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank
#47104
| Diameter (D) | 1/2 |
|---|---|
| Cutting Height (B) | 1″ |
| Shank (d) | 1/4 |
| Overall Length (L) | 2-5/8 |
| Replacement Bearing | 47706 |
| Flutes | 2 |
Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
Amana Tool AMS-190-K 18-Pc Spektra™ Extreme Tool Life Coated Solid Carbide Compression Spiral, Plastic Cutting Spiral ‘O’ Flute and Spiral Plunge Router Bit Collection
Amana Tool AMS-190-K 18-Pc Spektra™ Extreme Tool Life Coated Solid Carbide Compression Spiral, Plastic Cutting Spiral ‘O’ Flute and Spiral Plunge Router Bit Collection
#AMS-190-K
Our Spektra™ bits feature a nACo® nanocomposite coating with an extreme nanohardness and heat resistance. With a brilliant distinctively-tinted coloring nACo provides additional improvements in four critical aspects of router tooling.
Amana Tool 51200XL High Performance Solid Carbide AlTiN Coated Panel Pilot Flush Trim 1/4 Dia x 1/4 x 1/4 Inch Shank 1-Flute
Amana Tool 51200XL High Performance Solid Carbide AlTiN Coated Panel Pilot Flush Trim 1/4 Dia x 1/4 x 1/4 Inch Shank 1-Flute
#51200XL
| Diameter (D) | 1/4 |
|---|---|
| Cutting Height (B) | 1/4 |
| Shank (d) | 1/4 |
| Overall Length (L) | 1-1/2 |
| Type | Flush |
| Flutes | 1 |
Amana Tool 47706 Steel Ball Bearing Guide 1/2 Overall Dia x 3/16 Inner Dia x 3/16 Height
Amana Tool 47706 Steel Ball Bearing Guide 1/2 Overall Dia x 3/16 Inner Dia x 3/16 Height
Amana Tool® uses only the finest industrial quality precision ball bearings available. Bearings are double steel-shielded for extra rigidity and to inhibit dust. A special high-performance, high-temperature grease is used for maximum life.
47706
Timberline 190-10 Carbide Tipped Flush Trim 3/8 Dia x 1 x 1/4 Inch Shank with Ball Bearing
Timberline 190-10 Carbide Tipped Flush Trim 3/8 Dia x 1 x 1/4 Inch Shank with Ball Bearing
Recta De Laminados Con Rodamiento
SKU# 190-10
2&3 Flute with Ball Bearing Guide
Use any of the flush trimming bits below for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top.A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.
Amana Tool 45218 Carbide Tipped Straight Plunge High Production 3/8 Dia x 1 Inch x 1/4 Shank
Amana Tool 45218 Carbide Tipped Straight Plunge High Production 3/8 Dia x 1 Inch x 1/4 Shank
#45218
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Amana Tool PR1040C Electro-Blu Carbide Tipped Prestige General Purpose Saw Blade 10 Inch Dia 40T ATB, 18 Deg, 5/8 Bore, Non-Stick Coated
Amana Tool PR1040C Electro-Blu Carbide Tipped Prestige General Purpose Saw Blade 10 Inch Dia 40T ATB, 18 Deg, 5/8 Bore, Non-Stick Coated
10″ General Purpose Non-Stick Coated Saw Blade
5/8″ Bore
AGE MD160-480 Carbide Tipped Saw Blade
AGE MD160-480 Carbide Tipped Saw Blade
A.G.E. MD160-480
Timberline 175-24C 7-1/4 x 24 Tooth Carbide Tipped General Purpose Saw Blade 5/8″ Bore
Timberline 175-24C 7-1/4 x 24 Tooth Carbide Tipped General Purpose Saw Blade 5/8″ Bore
175-24C Carbide Tipped Professional Specialty All Purpose 7-1/4 Inch Dia x 24T ATB, 18 Deg, 5/8 Bore with Diamond Knockout
SKU# 175-24C
Thin Kerf
A durable series of saw blades designed for the contractors and Do-It-Yourselfers. These are very popular all-purpose blades used for ripping and crosscutting wood framing, decking and plywood.
Designed to cut:Softwood, Hardwood and Plywood7-1/4 Inch Dia x 24T ATB, 18 Deg, 5/8 Bore with Diamond Knockout
Amana Tool 45226 Carbide Tipped Straight Plunge High Production 1/2 Dia x 1 Inch x 1/4 Shank
Amana Tool 45226 Carbide Tipped Straight Plunge High Production 1/2 Dia x 1 Inch x 1/4 Shank
#45226
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced.
Amana Tool 45200 Solid Carbide Cutting Edge Straight Plunge High Production 1/8 Dia x 7/16 x 1/4 Inch Shank
Amana Tool 45200 Solid Carbide Cutting Edge Straight Plunge High Production 1/8 Dia x 7/16 x 1/4 Inch Shank
#45200
Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45200 features a solid carbide cutting edge.
