FS Tool AF2059A-UD3-12.9BH Aerotech Finishing Compression – 3/8″ Dia. × 4.8 mm L
$197.35
- 3/8" Dia. × 4.8 mm L
- For exceptionally smooth finishing cuts
- Z=3+3 for Aerotech System
Cutting Diam.
All 16 sizes in the AF-UD3 series →3/8"1/2"
FS Tool AF-UD3 Aerotech Finishing Compression — Z=3+3 for Aerotech System
Design
- Optimized for Aerotech System only (see page FC2)
- Router bits are shrinkfitted into reusable HSK20C holders
- 3 precision ground cutting edges
- Unmatched rigidity and near zero runout acheived by the shrinkfit connection
- Good chipflow and low heat retention is achieved by the three semi-polished flutes
- Increased cutting edge durability from special submicron, extended life carbide
- 30° helix design with bottom cutting capability
Application
- For exceptionally smooth finishing cuts
- Reduced run-out in parting cuts as 2 cutting edges are engaged at all times
- Increased number of bite marks per inch reduce chip size and provide a smooth finish, important when edge-banding without pre-miling
- Eliminates chipping, fuzzing, and tear-out when the end of the upcut and downcut cutting edges are more than 1/16" from the top and bottom surfaces
- When cutting rebates, dados, or pockets, use an upcut length that is at least 1/16" shorter than the shallowest cut
- If part movement is a concern, use an upcut length of 4.8mm (0.188") or shorter
Material
- Excellent finish on:
- Laminated panels
- Chipboard Good finish on:
- Softwoods and Hardwoods
- MDF
- Plywood, OSB (requires Aerotech flange Type: GRILL)
| Part No. | AF2059A-UD3-12.9BH |
|---|---|
| Series | AF-UD3 |
| Description | 3/8" Dia. × 4.8 mm L |
| Cutting Diam. | 3/8" |
| Max. Depth of Cut | 1/2" |
| Upcut Length | 4.8 mm |
| Shank Type | HSK20C |
| No. Flutes | 3+3 |
| Made in | USA (Alma, Michigan) |
| Part No. | Cutting Diam. | Max. Depth of Cut | Upcut Length | Price |
|---|---|---|---|---|
| AF2059A-UD3-12.9BH | 3/8" | 1/2" | 4.8 mm | $197.35 Add to cart |
| AF2059A-HUD3-12.9BH | 3/8" | 1/2" | 9.5 mm | $197.35 Add to cart |
| AF2059A-UD3-16BH | 3/8" | 5/8" | 4.8 mm | $197.35 Add to cart |
| AF2059A-HUD3-16BH | 3/8" | 5/8" | 12.0 mm | $197.35 Add to cart |
| AF2059A-UD3-19.25BH | 3/8" | 3/4" | 4.8 mm | $200.00 Add to cart |
| AF2059A-HUD3-19.25BH | 3/8" | 3/4" | 14.5 mm | $209.65 Add to cart |
| AF2059A-UD3-25.6BH | 3/8" | 1" | 4.8 mm | $206.75 Add to cart |
| AF2059A-HUD3-25.6BH | 3/8" | 1" | 19.0 mm | $206.75 Add to cart |
| AF2061-UD3-12.9BH | 1/2" | 1/2" | 4.8 mm | $281.90 Add to cart |
| AF2061-HUD3-12.9BH | 1/2" | 1/2" | 8.0 mm | $281.90 Add to cart |
| AF2061-UD3-16BH | 1/2" | 5/8" | 4.8 mm | $281.90 Add to cart |
| AF2061-HUD3-16BH | 1/2" | 5/8" | 10.0 mm | $281.90 Add to cart |
| AF2061-UD3-19.25BH | 1/2" | 3/4" | 4.8 mm | $289.30 Add to cart |
| AF2061-HUD3-19.25BH | 1/2" | 3/4" | 12.0 mm | $289.30 Add to cart |
| AF2061-UD3-25.6BH | 1/2" | 1" | 4.8 mm | $294.80 Add to cart |
| AF2061-HUD3-25.6BH | 1/2" | 1" | 16.0 mm | $308.85 Add to cart |
Brand
FS Tool
[block id="fstool"]
Need This Tool Customized?
Every machining application is different. If this tool is close to what you need but not an exact fit, General Cutting Tools can help modify it for your specific job, machine, material, or production requirement.
We work with CNC shops, industrial manufacturers, tool rooms, and production facilities to provide tool modifications that improve fit, function, performance, and efficiency. Whether you need a small adjustment or a more specialized cutting tool solution, our team can review your requirements and recommend the best option.
Custom tool modifications can help reduce setup time, improve accuracy, extend tool life, solve clearance issues, and support more consistent production results.
Common Tool Customization Options
Diameter and OD Modifications
We can modify tool diameters to better match your application requirements, including cutting diameter changes, OD modifications, pilot diameter adjustments, step diameters, and shank diameter modifications.
Bore Modifications for Saw Blades
Custom saw blade bore modifications are available for hole diameter changes, pinholes, mounting holes, and keyway cutouts to help match your machine setup and cutting requirements.
Length Adjustments
Tools can be modified for specific reach, clearance, or setup needs. This may include overall length changes, flute length adjustments, reduced neck sections, extended reach designs, or shortened tools for improved rigidity.
Shank Modifications
Shank modifications can help ensure the tool fits properly in your holder, spindle, or machine setup. Common options include shank diameter changes, flats, Weldon flats, reduced shanks, and custom holding requirements.
Radius, Chamfer, and Corner Changes
We can customize corner radius, chamfer angles, edge breaks, and other profile details to meet part print requirements or improve cutting performance.
Step Tool Modifications
For applications that require multiple diameters or operations in a single tool, we can create or modify step tools to help reduce tool changes and improve production efficiency.
Flute and Cutting Edge Adjustments
Depending on the tool and application, flute length, cutting edge geometry, end cutting features, relief angles, and cutting edge shape may be modified to improve chip evacuation, cutting action, and tool performance.
Regrinding and Resharpening
Many cutting tools can be reground or resharpened to restore performance, extend tool life, and reduce replacement costs.
Custom Profiles and Special Forms
For unique part features, we can help provide special forms, custom profiles, custom radii, counterbores, countersinks, keyseat cutters, form tools, and other application-specific tooling solutions.
Material-Specific Tool Adjustments
We can help modify or recommend tooling based on the material being machined, including aluminum, brass, bronze, plastics, stainless steel, hardened steel, cast iron, composites, and other industrial materials.
Have a Drawing, Sample, or Part Print?
Send us your print, sketch, CAD file, photo, tool number, sample, or application details. For the fastest quote, include the material being cut, quantity needed, required dimensions, tolerances, and any machine or holder requirements.
Coating Options
Tool coatings can be selected or added to improve wear resistance, heat resistance, lubricity, and performance in specific materials such as steel, stainless steel, aluminum, cast iron, and high-temperature alloys.
Request a Custom Tool Modification
Need this tool changed for your application? Contact General Cutting Tools today to discuss your custom tooling needs. We can help you find the right solution for your machine, material, and production goals.